{"id":825,"date":"2026-11-19T13:40:03","date_gmt":"2026-11-19T05:40:03","guid":{"rendered":"http:\/\/www.arkapipe.com\/blog\/?p=825"},"modified":"2026-11-19T13:40:03","modified_gmt":"2026-11-19T05:40:03","slug":"are-pressure-instruments-waterproof-4f4c-319c47","status":"publish","type":"post","link":"http:\/\/www.arkapipe.com\/blog\/2026\/11\/19\/are-pressure-instruments-waterproof-4f4c-319c47\/","title":{"rendered":"Are pressure instruments waterproof?"},"content":{"rendered":"<p>If you\u2019ve ever worked in industries like oil and gas, marine, or wastewater management, you know how critical pressure instruments are. A leak in a pipeline, a misreading in a subsea sensor, or a faulty gauge in a chemical processing plant can lead to costly downtime, safety hazards, or even environmental damage. That\u2019s why one of the most common questions we get at our pressure instruments supply company is: \u201cAre these instruments waterproof?\u201d It\u2019s not a trivial question\u2014water exposure is one of the top causes of pressure instrument failure, and getting the answer right can mean the difference between a reliable, long-lasting tool and a replacement unit costing thousands of dollars. <a href=\"https:\/\/www.tkanggroup.com\/instruments-and-meters\/pressure-instruments\/\">Pressure Instruments<\/a><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.tkanggroup.com\/uploads\/48722\/small\/guided-wave-radar-level-meter28b64.jpg\"><\/p>\n<p>Let\u2019s start with a quick reality check: no pressure instrument is entirely waterproof. That\u2019s a fact, plain and simple. Even the most rugged, marine-grade sensors can only resist water ingress to a certain degree, depending on how they\u2019re designed, tested, and labeled. The confusion often comes from how manufacturers define \u201cwaterproof\u201d versus \u201cwater-resistant,\u201d and how industry standards classify an instrument\u2019s ability to handle water exposure. As someone who\u2019s been in this business for 12 years, I\u2019ve seen customers write off a perfectly good instrument because they misinterpret the label, and others push a limit that leads to premature failure. So let\u2019s break this down, not with jargon, but with the practical experience we\u2019ve gained working with thousands of clients across sectors.<\/p>\n<p>First, let\u2019s clarify the terms. The International Electrotechnical Commission (IEC) created the IP (Ingress Protection) code system, which is the global standard for rating an instrument\u2019s resistance to solid particles and liquids. This code is the gold standard for evaluating waterproofing, and it\u2019s what every reputable pressure instrument supplier uses to communicate performance. An IP rating has two numbers: the first is for solids (dust, dirt), the second is for liquids (water). For example, an IP67 rating means the instrument is dust-tight (6) and can withstand immersion in up to 1 meter of water for 30 minutes (7). An IP68 rating is even higher: it means the instrument is dust-tight and can withstand continuous immersion in water beyond 1 meter, as defined by the manufacturer.<\/p>\n<p>But here\u2019s the catch: an IP68 rating is not a free pass to drop your pressure sensor into the deepest part of the ocean. The \u201cbeyond 1 meter\u201d part is specific to the manufacturer\u2019s testing parameters. We recently had a client in the offshore wind industry try to use a standard IP68 pressure transmitter at 80 meters depth\u2014way beyond the 30-meter limit we tested our units for. The result? Water seeped through a tiny gap in the cable gland, damaged the internal circuit board, and cost them a week of unplanned downtime. That\u2019s the kind of mistake that happens when you take an IP rating out of context. Water pressure increases by 1 atmosphere for every 10 meters of depth, so a rating that works at 1 meter won\u2019t hold at 50 meters. Waterproofing for pressure instruments isn\u2019t just about resisting water\u2014it\u2019s about resisting the pressure of water, which changes depending on where and how you\u2019re using the instrument.<\/p>\n<p>Another common misconception: \u201cAll stainless steel pressure instruments are waterproof.\u201d Stainless steel is corrosion-resistant, but it\u2019s not impenetrable. Even 316L stainless steel, the gold standard for marine applications, can develop micro-pores over time from exposure to saltwater, chemicals, or temperature fluctuations. We\u2019ve had customers send back instruments that looked fine on the outside, but had tiny, undetectable cracks in the housing that allowed water to seep in after a few months of use in coastal areas. Those micro-pores are why manufacturers add secondary sealing systems: O-rings made of nitrile or Viton, welded cable connections, and epoxy seals around internal components. A good pressure instrument isn\u2019t just made of waterproof material\u2014it\u2019s sealed at every possible point where water could get in.<\/p>\n<p>Let\u2019s talk about different types of pressure instruments and their waterproof limits, because not all are designed the same. For example, a low-pressure gauge used in a water treatment plant\u2019s above-ground tank is usually rated IP65. That means it can withstand high-pressure water jets (like from a hose) but not immersion. You can rinse it off if it gets dirty, but you can\u2019t submerge it. A subsea pressure transmitter, on the other hand, is almost always IP68, with a custom-rated depth for the specific application. We design our subsea transmitters with hermetically sealed housings, meaning the internal components are enclosed in a gas-tight, vacuum-sealed package\u2014no air, no moisture, no way for water to get in. But even those need to be matched to the application: a transmitter rated for 100 meters can\u2019t handle 500 meters, and vice versa.<\/p>\n<p>Then there are \u201cwaterproof\u201d pressure switches, which are commonly used in irrigation systems, marine engines, and HVAC units. A lot of off-the-shelf switches on the market claim to be waterproof, but many are only IP67, which means 30 minutes at 1 meter. If you need a switch that\u2019s going to be permanently installed submerged in a pond or a ship\u2019s bilge, you need something with a higher IP rating\u2014IP68, or even IP69K, which is rated for high-temperature, high-pressure water jets (used in food and beverage processing, for example). We\u2019ve had clients in the aquaculture industry install IP67 switches in underwater feeders, and within six months, they were failing because the feeder was permanently submerged. Switching to IP68 units fixed the problem entirely.<\/p>\n<p>The other side of this is testing. No manufacturer can claim an instrument is waterproof without rigorous, third-party testing. When we receive a new batch of pressure instruments, we don\u2019t just check the IP label\u2014we submerge a sample of them in water for 72 hours, run them through temperature cycles, and test their pressure readings to make sure they\u2019re still accurate. If an instrument passes that test, we know it\u2019s not just a label\u2014its waterproofing is real. We\u2019ve seen cheap, no-name instruments that claim IP68 but fail the 1-meter immersion test after 10 minutes. For industries where reliability is non-negotiable, that\u2019s a risk you can\u2019t take.<\/p>\n<p>So, what does this mean for you, as someone who relies on pressure instruments? The key is to match the instrument\u2019s waterproof rating to your specific application. Ask yourself: Will this instrument be above ground, or submerged? How deep? What kind of water is it going to be exposed to\u2014freshwater, saltwater, or water with chemicals? How long will it be exposed to that water? If you\u2019re not sure, don\u2019t guess\u2014talk to a supplier who understands the nuances of pressure instrument waterproofing.<\/p>\n<p>At our company, we don\u2019t just sell instruments; we work with clients to solve their specific problems. Last year, a wastewater treatment plant reached out to us because their pressure gauges were failing every two months due to exposure to chlorinated water in their pipelines. We didn\u2019t just sell them a higher IP67 gauge\u2014we swapped out their standard O-rings for Viton ones, which are more resistant to chlorine, and added a protective coating to the gauge housing. The result? Their gauges have now lasted over a year, with zero failures. That\u2019s the value of working with a supplier who knows that \u201cwaterproof\u201d isn\u2019t just a buzzword\u2014it\u2019s a performance standard that needs to fit your needs.<\/p>\n<p>Another thing to keep in mind: even the most waterproof instrument can fail if it\u2019s installed or maintained incorrectly. A loose cable gland, a damaged O-ring during installation, or a cracked housing from rough handling can break the waterproof seal. We always include installation guides with every instrument, and our team is available to walk clients through the process, answer questions, and offer maintenance tips. For example, we recommend checking seals and cable connections every six months for subsea instruments, or after any major exposure to water or chemicals. Small, routine checks can prevent big, expensive failures.<\/p>\n<p>Let\u2019s wrap this up with a clear takeaway: Pressure instruments aren\u2019t \u201c100% waterproof,\u201d but they can be extremely resistant to water ingress when designed, tested, and installed correctly. The IP rating system is your best tool for understanding performance, but you need to interpret it in the context of your specific application. Avoid generic claims of \u201cwaterproof\u201d and look for verified ratings, and always match the instrument\u2019s capabilities to how you\u2019ll use it.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.tkanggroup.com\/uploads\/48722\/small\/new-fiber-optic-cablea273b.jpg\"><\/p>\n<p>If you\u2019re in the market for pressure instruments and want to make sure you\u2019re getting the right waterproof solution for your project, we\u2019re here to help. Whether you\u2019re working on marine equipment, wastewater systems, offshore energy, or any other application that involves water exposure, our team can walk you through our product lines, discuss your requirements, and help you avoid costly mistakes. Reach out to our team to connect and discuss your needs in detail.<\/p>\n<p><a href=\"https:\/\/www.tkanggroup.com\/instruments-and-meters\/flow-instruments\/\">Flow Instruments<\/a> References:<\/p>\n<ol>\n<li>International Electrotechnical Commission (IEC) Standard 60529: Degrees of Protection Provided by Enclosures (IP Code)<\/li>\n<li>NACE International Standard SP0177: Corrosion Resistant Materials for Marine Applications<\/li>\n<li>American Society of Mechanical Engineers (ASME) PTC 19.2: Pressure Measurement Instruments and Apparatus<\/li>\n<li>International Organization for Standardization (ISO) 17025: General Requirements for the Competence of Testing and Calibration Laboratories<\/li>\n<li>National Marine Manufacturers Association (NMMA) Standards for Marine Instrumentation<\/li>\n<\/ol>\n<hr>\n<p><a href=\"https:\/\/www.tkanggroup.com\/\">Anhui Tiankang Group Co., Ltd.<\/a><br \/>As one of the most professional pressure instruments manufacturers and suppliers in China, we&#8217;re featured by quality products and good service. Please feel free to wholesale bulk customized pressure instruments made in China here from our factory. Welcome to contact us for pricelist.<br \/>Address: No.20, South Renhe Road, Tianchang City, Anhui Province, People&#8217;s Republic of China<br \/>E-mail: tiankanggroup006@163.com<br \/>WebSite: <a href=\"https:\/\/www.tkanggroup.com\/\">https:\/\/www.tkanggroup.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"<p>If you\u2019ve ever worked in industries like oil and gas, marine, or wastewater management, you know &hellip; <a title=\"Are pressure instruments waterproof?\" class=\"hm-read-more\" href=\"http:\/\/www.arkapipe.com\/blog\/2026\/11\/19\/are-pressure-instruments-waterproof-4f4c-319c47\/\"><span class=\"screen-reader-text\">Are pressure instruments waterproof?<\/span>Read more<\/a><\/p>\n","protected":false},"author":322,"featured_media":825,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[788],"class_list":["post-825","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-pressure-instruments-4b34-31cd52"],"_links":{"self":[{"href":"http:\/\/www.arkapipe.com\/blog\/wp-json\/wp\/v2\/posts\/825","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.arkapipe.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.arkapipe.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.arkapipe.com\/blog\/wp-json\/wp\/v2\/users\/322"}],"replies":[{"embeddable":true,"href":"http:\/\/www.arkapipe.com\/blog\/wp-json\/wp\/v2\/comments?post=825"}],"version-history":[{"count":0,"href":"http:\/\/www.arkapipe.com\/blog\/wp-json\/wp\/v2\/posts\/825\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.arkapipe.com\/blog\/wp-json\/wp\/v2\/posts\/825"}],"wp:attachment":[{"href":"http:\/\/www.arkapipe.com\/blog\/wp-json\/wp\/v2\/media?parent=825"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.arkapipe.com\/blog\/wp-json\/wp\/v2\/categories?post=825"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.arkapipe.com\/blog\/wp-json\/wp\/v2\/tags?post=825"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}