Posted in

What is the best way to move heavy cages?

As a long-time cage supplier—we’ve been serving businesses in agriculture, pet care, and industrial logistics for 12 years, I’ve spent more time than I can count troubleshooting heavy cage moves. Whether it’s a 500-pound stainless steel livestock breeding crate heading to a dairy farm or a stack of 200-pound dog kennels bound for a national pet retailer, bad moves don’t just damage product—they cost you time, money, and even safety. Over the years, I’ve tested every trick in the book, from rickety hand carts we cobbled together in the back workshop to fancy industrial lift equipment we rented for big orders. But through trial and error, I’ve landed on a method that’s not just fast—it’s safe for your team, preserves the integrity of your cages, and cuts down on damage claims. Let’s break down what works, why it works, and the mistakes that still trip people up. Cages

First, let’s start with a non-negotiable step most people skip entirely: pre-move preparation that’s specific to your cage type. A heavy brooder cage for chicken chicks isn’t the same as a large animal transport cage, and a plastic dog crate is way different from a galvanized steel breeding cage. If you don’t account for that, you’re setting yourself up for back injuries or cracked cage frames. For steel cages, the biggest risks are bent welds (which ruin structural integrity) and sharp edges from dented panels. For plastic cages, it’s stress cracks from uneven weight distribution. Here’s what I recommend: Take 10 minutes before any move to measure your cage’s center of gravity (CoG). For most standard rectangular cages, that’s roughly 60% of the height from the floor—so if your cage is 5 feet tall, you want to be lifting around 3 feet off the ground. For tapered cages (like rabbit hutches that narrow at the top), the CoG is lower, closer to 40% of the height. If you skip this, you’ll either lift too high and the cage will tip backward, or too low and strain your lower back. We even include a quick CoG diagram on every cage manual we ship, because too many of our clients have told us they ignored that and spent days fixing a bent frame.

Next, the tool that’s worked better than any other for heavy cages is a low-profile, heavy-duty hand cart with a reinforced wheel base. Not the flimsy plastic carts you rent at a big box store—those are designed for moving boxes, not rigid, awkwardly shaped cages. The right cart for cages has a load capacity of at least 1,000 pounds (we tested dozens, and anything lower will bend or break on a single heavy cage), with wheels that are 8 inches or larger—small wheels get stuck on concrete cracks or uneven warehouse floors, which can send a cage tumbling. The trick here isn’t just grabbing any cart—it’s how you position the cage on it. You never set the cage right on the cart’s deck; you slide it so its CoG is directly over the cart’s axles. That means if your cage’s CoG is 3 feet high, the center of the cage should line up exactly with the point where the two wheels connect to the cart. For stacked cages (say, moving a pallet of 10 dog kennels each weighing 150 pounds), spread the load evenly: put 50% of the weight on each half of the cart, and never stack more than two levels unless the cart is rated for double that total weight. I’ve seen a client try to stack three 200-pound cages on a standard moving cart, and it collapsed mid-warehouse, sending the cages crashing into a forklift—total damage cost was over $8,000, plus a 3-day backlog on their order. That’s a mistake no one wants to make.

If you’re moving cages over long distances or in tight warehouse spaces, a cage dolly with adjustable straps is a game-changer—but you have to use the straps right. A lot of people just loop a strap around the top of the cage and yank it tight, but that creates pressure points that can crack plastic or bend steel frames. Instead, use two straps: one around the middle of the cage (around the CoG line) and one around the base. The middle strap keeps the cage from tipping forward, and the base strap keeps it from sliding off the dolly. For heavy cages over 400 pounds, always use a lifting aid, not manual pulling—straining your back isn’t worth it, and OSHA has specific guidelines for material handling that even small businesses need to follow. We supply these adjustable straps as a free add-on for orders over 10 cages, because we’ve seen how often clients reuse them for their own in-house moves once they realize how much safer they are.

Wait, but what if you don’t have access to a forklift or a big hand cart? Maybe you’re a small farm moving a single breeding cage, or a pet shelter relocating a stack of kennels to a new facility. For those situations, team lifting with proper form is non-negotiable—but not the “everyone grabs a corner” method that most people use. Studies from the Occupational Safety and Health Administration (OSHA) show that team lifting is 50% less likely to cause injury if you assign specific roles, not just random corners. Here’s how to do it right for a heavy cage: First, count the number of people needed—for a 500-pound steel cage, you need at least 3 people (one at each long side, one at the front) instead of 2. Second, assign a lead person: that’s the one who knows the CoG, who will call out “lift” and “lower” to keep everyone synchronized. Third, each person places their hands under the cage’s sturdy structural points—not the thin wire panels or the flimsy corners. For most cages, that’s the metal frame at the base, 6 inches from each edge. Never put hands on the wire mesh, because it can bend and pinch, or break under the weight. I’ve seen a shelter volunteer do that trying to move a 300-pound dog kennel, and the mesh gave way, sending the cage crashing down and breaking their wrist. Following that step would have prevented that entirely.

Now, let’s talk about the common mistakes that even experienced teams make, because those are the things that turn a simple move into a disaster. The first big one is ignoring cage-specific weight limits. Every one of our cages comes with a maximum load label—for a steel chicken cage, it’s usually 600 pounds total (including birds, feed, and water), but some people try to stuff a 800-pound load into it, then move it without accounting for that extra weight. The second mistake is moving cages on uneven ground, like grass or gravel, without stabilizing them. A cage on grass can tip 20 degrees easier than one on concrete, so if you have to move over uneven surfaces, use a ramp or a portable load leveler to keep the cart flat. The third mistake is not covering sharp edges when moving cages to a job site. If you’re delivering a cage to a dairy farm, the metal edges can scratch truck beds or other equipment, so we always supply edge guards as a free accessory for delivery moves—something that saves our clients hundreds in repair costs.

I should also mention a tip that’s specific to our business as a cage supplier: when we’re packing cages for long-haul delivery, we use interlocking foam corners and dividers, but when you’re moving empty cages, you can use that same interlock to stack them safely. Most cages are designed to stack, but if you don’t align the locking pins correctly, they’ll shift during transport. For example, a rabbit hutch has plastic feet that fit into slots on the bottom of the hutch below it—if you push those feet into the slots, the stack won’t slide, even if the truck hits a pothole. We’ve had clients tell us this cuts their in-transit damage from 7% to less than 1% when they use that stacking method. It’s a small detail, but it makes a huge difference.

Let’s put this all together into a step-by-step guide you can use next time you’re moving heavy cages, whether it’s in a warehouse, on a job site, or between facilities. Step 1: Inspect your cage—check for bent welds, loose parts, or stress cracks, and confirm the total weight (cage plus any items inside) to pick the right tools. Step 2: Measure the center of gravity and mark it with a piece of tape—this is your anchor point for straps and lifting. Step 3: Choose your tool: for moves under 50 feet, a heavy-duty hand cart works; for longer moves or tight spaces, use a cage dolly with adjustable straps; for team lifting, assign 3 people minimum, a lead, and hand placements on structural points. Step 4: Position the cage on the tool with the CoG directly over the axles, and secure it with two straps (one at CoG, one at base) if using a dolly or cart. Step 5: Move slowly, no sudden turns or stops, and keep the cage as level as possible at all times. Step 6: When setting the cage down, use a flat, stable surface, and align the feet or base correctly if stacking.

Now, let’s talk about why this works for our clients, not just in theory. Last year, a large commercial livestock operation came to us complaining that they were spending $12,000 a month replacing damaged breeding cages because their warehouse team was using basic hand carts and random team lifting. We showed them this method, walked their team through a live demonstration with two of our 550-pound steel breeding cages, and adjusted their cart setup to match our CoG guidelines. Six months later, they told us their damage claims dropped to under $1,000 a month—half of that was just a single minor scratch that was easy to fix. That’s the difference between a method that’s based on trial and error, and one that’s science-backed and tailored to cage movement.

At the end of the day, moving heavy cages doesn’t have to be a guesswork process. It’s about matching your tools to your cage’s structure, accounting for weight distribution, and avoiding the small mistakes that cause most damage and injuries. If you’re a business looking to source durable, easy-to-move cages, or if you need help refining your in-house move processes to cut down on damage and risk, we’re here to help. We’ve worked with small pet shelters, large agricultural operations, and industrial logistics firms, and we can tailor solutions to fit your space, team size, and needs. Reach out to our team to discuss your requirements, and we’ll send over a custom guide for your specific cage types, plus a free set of edge guards and straps for your next move. Don’t let bad moves cost you time, money, or safety—let’s get your cages where they need to go, in one piece.

Stack Racks References:
OSHA. (2022). Material Handling and Storage Guidelines for Manual Lifting. Occupational Safety and Health Administration.
National Agricultural Safety Database. (2021). Safe Handling of Livestock Transport Equipment. University of Nebraska-Lincoln Extension.
American Kennel Club. (2020). Guidelines for Moving Pet Crates and Kennels. AKC Pet Care Division.
International Organization for Standardization. (2019). Standard for Structural Integrity of Metal and Plastic Cages for Commercial Use. ISO 11228-3.


Qingdao Eamons Industries Co., Ltd.
As one of the most professional cages manufacturers and suppliers in China, we’re featured by quality products and good service. Welcome to buy bulk customized cages made in China here from our factory. If you have any enquiry about cooperation, please feel free to email us.
Address: Room 1720, Poly Center Mansion, No. 1068 Jinshui Road, Licang District, Qingdao City, Shandong Province, China
E-mail: Sales@eamons.net
WebSite: https://www.eamons.net/