Posted in

How to adjust the stroke on a cold forming machine?

Hey everyone, if you’re running a cold forming machine, you know how crucial getting the stroke right is. Mess that up, and you’re looking out of spec parts, tool wear way faster than it should, and even machine downtime that eats into your production schedule. I’m gonna break this down like I do when I walk new operators through this at my shop—no jargon overload, just the real stuff we actually use day to day. Let’s dive in. Cold Forming Machine

First, quick recap for anyone who might be new here: the stroke on a cold forming machine is basically the distance the ram (that big moving part that does the forming) travels from its highest point to where it presses against the die. Too short, and your blanks don’t get shaped all the way—hello, defective fasteners or precision parts. Too long, and you’re overworking your tooling and ram, which leads to broken punches, die cracks, and that’s a whole mess to fix. As a cold forming machine supplier, I’ve seen more guys skip this step and regret it than I can count, so let’s get this right.

First rule: always lock it out before you touch anything. I can’t stress this enough. Lockout/tagout (LOTO) isn’t just a buzzword—it’s how we keep you from your hand getting caught or the machine accidentally firing while you’re adjusting. Grab the machine’s power lockout, turn the main breaker off, and hang a tag that says “Maintenance in Progress” so no one can flip it back on. Then, if your machine has a flywheel brake, set that too to make sure the ram doesn’t move while you’re messing with settings.

Next, you need to know what stroke your machine is supposed to run for the part you’re making. That’s non-negotiable. If you’re forming a 10mm bolt head, you don’t use the same stroke as a 16mm bolt. Check your part blueprint first—most of the time, the manufacturer’s spec for your specific die set is right there, or you can ask your rep (that’s me, if you’re working with a cold forming machine supplier) to send over the correct stroke range for your setup. Don’t guess here; guesswork = mistakes.

Now, how to actually adjust the stroke. Most modern cold forming machines have two main ways to tweak stroke: mechanical adjustment (most common on older or mid-tier models) and electronic adjustment (on newer CNC machines). Let’s cover both, since I’ve got machines in both categories out in the field.

Starting with mechanical adjustment, which is what I’ve trained most operators on. The key part here is the crankshaft adjuster. On mechanical machines, the ram’s stroke is controlled by the eccentric on the crankshaft—spin that eccentric, and you change the distance the ram travels. First, you’ll need to loosen the locking bolts on the eccentric sleeve. Most machines have a few hex bolts holding it in place—use a properly sized wrench (don’t use a cheater bar unless you have to, you’ll strip the bolts) to back those off. Then, you’ll have a gauge block or a stroke indicator tool—these are standard in any shop that runs cold forming machines, so if you don’t have one, hit me up, I can send a set over. Position the indicator so it’s touching the top of the ram, then manually turn the crankshaft (make sure LOTO is still active? Wait, no—wait, when you’re adjusting the eccentric, you might need to move the ram, so you have to make sure the power is off, and you’re turning the flywheel by hand, slowly. That’s a middle step I almost forgot.)

Once you’re turning the flywheel, watch the indicator. When the ram is at its lowest point, take a measurement. Compare that to the top dead center (TDC) measurement—subtract TDC from the lowest point, and that’s your stroke. Let’s say your part needs a 50mm stroke. If the measurement is 47mm, you need to spin the eccentric a little to add 3mm. If it’s 53mm, spin it the other way to take off 3mm. Small adjustments here matter—turning the eccentric a 1/16 of a turn can change stroke by 1mm or so, so take it slow. Once you get the measurement right, tighten the locking bolts back down, then double-check. Sometimes tightening the bolts can shift the eccentric just a tiny bit, so re-measure after you’re done.

Now electronic adjustment, which is way faster if you’re on a CNC cold forming machine. No messing with eccentric sleeves or wrench work—most of these have a touchscreen interface. You just go to the “Stroke Setup” menu, input the desired stroke length, and the machine does the rest of the math. Wait, but don’t just punch in a number and walk away. First, you still need to calibrate the machine’s electronic sensors. Every 3 months or whenever you swap die sets, calibrate the ram position sensor. How? Run the machine in jog mode (so it only moves a little at a time) to TDC, then set the sensor’s reference point. Then input your stroke. Even with electronic adjustment, I’ve seen sensors drift after a power outage, so always verify with a physical measurement using a caliper or dial indicator after you input the number. The screen might say 50mm, but if your actual measurement is 49.5mm, that’s a 0.5mm difference that can throw off your parts.

Now, after you adjust, you can’t just start running full production. You need to test it first. Grab a test blank—same material and size as your production blanks—and run a trial. Form one part, then check three things: first, the part’s dimensions. Is the head diameter right? Is the shank length within spec? Second, check the tooling. After that first trial, pull the punch and die out and look at them. Is the punch mark consistent, no over-compression? Is the die showing even wear, no dents from the ram hitting too hard? Third, run 10 or 15 parts in a row to make sure the stroke is consistent. If some parts are slightly longer than others, that means the stroke is drifting—so you need to check if the eccentric is tight, or if your electronic sensor needs a calibration.

Wait, there are common mistakes guys make with stroke adjustment that I should call out. One: rushing it. I’ve had a guy at a shop call me at 2AM once because he adjusted the stroke in 5 minutes instead of double-checking, and his punch broke, taking out a die that cost $1200 to replace. Two: ignoring the back pressure. Stroke isn’t just about how far the ram goes—you also have to adjust the back pressure in the die set. If you set the stroke right but the back pressure is too low, the blank won’t stay in place, so you get misformed parts. If back pressure is too high, it adds extra load that shortens the stroke’s effective power, same as too long a stroke. Three: not adjusting for material variation. If you’re switching from 8mm mild steel to 10mm mild steel, you need a longer stroke—thicker material needs more forming force, so the ram has to travel a bit further. Don’t keep the same stroke just because it worked for thinner stock.

Another thing: stroke and force go hand in hand. A lot of new operators think “longer stroke = more force” but that’s not true—force is from the machine’s tonnage rating, stroke is the distance. But if you set stroke too long, you’re using more of the machine’s power to move the ram, so you might not have enough force left to actually form the part. That’s why the spec from the cold forming machine supplier (that’s me) is so important—we tell you the sweet spot where stroke and tonnage work together for your specific part.

What if your machine has an adjustable bolster plate? Oh right, some machines let you adjust the bolster plate height to change the ram’s position, which also changes stroke. That’s another step to check before you mess with the eccentric. If you lower the bolster plate, the ram has to travel further, so stroke increases. If you raise it, stroke decreases. So always check the bolster plate first when you’re doing a stroke adjustment—guys skip that all the time, and they’re messing with the eccentric for no reason.

Let me walk you through a quick example. Say we’re making a M8 hex bolt, which spec calls for a 45mm stroke. First, LOTO the machine, remove the old die set. Raise the bolster plate if the new die is shorter, lower if it’s taller, so the ram sits right above the die when at TDC. Then, loosen the eccentric bolts, use the stroke indicator to set the ram’s travel from TDC to 45mm, tighten the bolts, re-measure. Jog the ram down a couple times to make sure it doesn’t hit the die (that’s a big no—if the ram bottoms out, you’ll break the die and the ram end cap). Run 5 test parts, check dimensions, check tooling. If all good, run a 100-part batch, then check one more part halfway through to make sure stroke is still consistent.

If you run into issues after adjusting, what do you do? If parts are underformed (too short a head, incomplete thread forming), your stroke is too short—adjust the eccentric or lower the bolster. If parts are misshapen, or punches are breaking, stroke is too long—adjust eccentric or raise the bolster. If stroke drifts during production, check if the eccentric locking bolts are loose (they can vibrate loose over time), or if the electronic sensor is dirty or needs calibration.

As a cold forming machine supplier, I can’t emphasize enough that this isn’t a one-and-done task. Every time you swap a die set, change material thickness, or run a different part, you need to adjust the stroke. Even if it’s the same part, after a few thousand parts, tooling wear can change the required stroke—so recheck every 10,000 parts or so. Skipping that is how you get 10,000 bad parts in a row, which is a waste of material and time.

Also, keep your stroke gauge tools calibrated. A caliper that’s off by 0.5mm will throw your whole adjustment off. I recommend sending your gauge set to a metrology shop once a year to get it checked, or just grab a new set if yours is old—cheap insurance against bad parts.

Wait, should I mention safety again? Yeah, even with all the steps, safety is king. Never reach into the die area while the machine is moving, even in jog mode. Always make sure the ram has enough clearance above the die before you start production. If something sounds off when the machine runs after adjusting, shut it down immediately—don’t ignore weird noises, that’s your machine telling you something’s wrong.

At the end of the day, adjusting stroke on a cold forming machine is part science, part routine. It’s not rocket science, but it does need attention to detail. I’ve seen shops that cut corners here spend twice as much time fixing issues than they do running good parts. If you’re new to cold forming machines, or if you’re dealing with a setup that’s giving you trouble, don’t guess—reach out, and I can walk you through it, or send a tech to your shop to make sure your stroke is dialed in right. We’re not just here to sell machines, we’re here to help you run smoothly.

If you’re in the market for a new cold forming machine or need support with your current setup, hit me up to connect and talk through your needs. No generic sales pitches, just real advice for running your production line.

Screw Auto Packing Machine Reference:

  1. Cold Forming Technology Association. (2022). Operator’s Guide to Stroke Adjustment for Mechanical Cold Forming Machines.
  2. Modern Machine Shop. (2021). CNC Cold Forming: Calibration Best Practices for Precision Parts.
  3. Tooling and Manufacturing Association. (2023). Common Stroke Adjustment Mistakes and Preventive Maintenance for Cold Forming Equipment.

Shandong Prolu Machinery Technology Co., Ltd.
Shandong Prolu Machinery Technology Co., Ltd. is well-known as one of the leading cold forming machine manufacturers and suppliers in China. Please feel free to buy high quality cold forming machine for sale here from our factory. Contact us for quotation.
Address: No.6326 Jingshi West Road, Jinan City, Shandong Province, China
E-mail: lu18853107186@163.com
WebSite: https://www.prolumachinery.com/