Posted in

Can Polycarboxylate Superplasticizer 50% be used in combination with air entrainers?

If you’ve ever walked across a smooth, crack-free sidewalk or leaned against a sturdy concrete bridge beam, you’ve probably interacted with a material that relies on two of my most talked-about products: polycarboxylate superplasticizer (PCE) 50% and air entrainers. As a supplier of PCE 50% for over a decade, I get questions every day from contractors, lab technicians, and even new builders who are hesitant to mix these two additives. The question always comes down to the same thing: Can Polycarboxylate Superplasticizer 50% be used in combination with air entrainers? Let me break this down the way I do with every client who calls our lab—no overly technical jargon, just real-world results and science that makes sense. Polycarboxylate Superplasticizer 50%

First, let’s ground this in what each product does, because you can’t talk about combining them without understanding their jobs. Polycarboxylate Superplasticizer 50% is our core product here. It’s a liquid, 50% active ingredient (meaning half the volume is the working polycarboxylate polymers, the other half is a carrier like water that keeps it stable during transport and storage). Its main job is to reduce the water content in concrete mixes while keeping the workability high. Before PCEs, builders relied on older plasticizers like lignosulfonates, which were less efficient, would make concrete weaker if you used too much, or would slow down setting times. PCE 50% changed that because it adheres to cement particles, repels them from each other, and lets the mix flow without extra water—perfect for making high-strength, durable concrete.

Air entrainers, on the other hand, are surfactants that create tiny, uniform air bubbles in concrete, usually between 10 and 100 micrometers. Those bubbles are critical for cold climates: when water in concrete pores freezes and expands, the bubbles give the water a place to move, so the concrete doesn’t crack from internal pressure. They also improve workability in fresh mixes, reduce bleeding (when water rises to the top of wet concrete), and can make concrete more resistant to de-icing salts.

So why do people think these two can’t mix? A lot of old, outdated guides warn against combining superplasticizers and air entrainers, saying they’ll counteract each other. Let me tell you where that myth came from. Back in the day, the plasticizers we used were naphthalene-based, which are very large, negatively charged molecules. Air entrainers are also charged surfactants, and sometimes the two would bind to each other before they could do their jobs—so neither the PCE could disperse cement nor the air entrainer could form bubbles. That’s where the bad reputation started. But polycarboxylate superplasticizers are a different breed entirely. Their structure is way more flexible than older plasticizers, and when formulated correctly, they don’t bind with air entrainers in a bad way.

I’ve seen this work hundreds of times. Last winter, a contractor in Minnesota called me panicking because he was working on a 10,000-square-foot parking lot, and the local specs required 6% air content in the concrete to pass freeze-thaw tests. He had been using our PCE 50% alone, but when he added a standard air entrainer, his mix got sticky and lost workability. I sent our lab team to test a quick trial mix, and we adjusted the order of addition and the dosage rates. Here’s what we did: instead of adding both additives at the same time, we added the PCE 50% first, let it disperse the cement particles for 30 seconds, then added the air entrainer. We cut the air entrainer dosage by 15% (since the PCE helped the mix retain air bubbles better) and kept the PCE 50% at its usual 0.2% by weight of cement. The result? 6.2% air content, slump of 7 inches (way more workable than he needed for paving), and the concrete passed a freeze-thaw test with zero damage after 50 cycles. That’s the kind of real success you only get when you know how to pair these two right.

Now, let’s get into the science of why this combination works for PCE 50% specifically, rather than other PCE grades. PCE superplasticizers have a backbone of acrylic acid (which is negatively charged) and side chains of polyethylene glycol (PEG), which are neutral and create steric hindrance. When you add PCE to wet concrete, the negatively charged backbone sticks to the positively charged surfaces of cement particles, and the neutral side chains keep the particles apart. Air entrainers are usually anionic surfactants (also negatively charged) or non-ionic. The key here is that PCE’s side chains are long enough that they don’t interfere with the air entrainer’s ability to form bubbles—unlike smaller naphthalene plasticizers, which would wrap around the air entrainer molecules and prevent them from trapping air. But it’s not just about charge; it’s also about how you introduce the additives.

The order of addition is the biggest factor here, and this is something a lot of on-site teams get wrong. If you add air entrainer first, it will form bubbles that get disrupted when you add PCE. The PCE’s polymers can break the bubble walls, leading to lower air content than you need. Adding PCE first lets it coat all the cement particles and disperse the mix evenly before the air entrainer has to do its job. That way, the air entrainer can move freely in the paste and form small, uniform bubbles instead of fighting to stay intact against the PCE.

Dosage rates matter too. For PCE 50%—our grade, which is 50% active polymer—most standard mixes use 0.15% to 0.3% by weight of cement. Air entrainer dosage is usually 0.02% to 0.1% by weight of cement, depending on what you need. When combining them, you might not need to increase the air entrainer at all; in fact, you might even lower it a little, because the well-dispersed paste from PCE 50% is better at holding air bubbles. I had a bridge engineer in Ohio last year who was using a lower dosage of PCE 50% (0.18%) and needed 5.5% air for a bridge deck. He tried adding the usual air entrainer dosage and only got 4.8% air. When we upped the PCE 50% to 0.22% (still within the recommended range) and kept the air entrainer the same, he got 5.7% air and a 28-day compressive strength of 5,800 psi—100 psi higher than his target. That’s a win for both workability and durability.

Of course, there are a few caveats, and I always tell clients to test their specific mix before going full-scale. Not all air entrainers are the same, and not all PCE 50% grades are identical. Some air entrainers are made for high-alkali cement, others for low; some PCE 50% is formulated for high-strength mixes, others for self-consolidating concrete (SCC). If you’re using a PCE 50% that’s designed for SCC and pairing it with a wood resin-based air entrainer, you might need a slight adjustment in dosage. That’s why we recommend a small batch test first—usually a 5-gallon or 1-cubic-foot trial mix—to check air content, slump, setting time, and compressive strength before you pour the whole job.

Another thing to watch for: bleeding and segregation. When you use PCE 50% alone, it reduces water demand, so you can have a very flowable mix without adding extra water. But when you add air entrainers, you have to make sure the mix doesn’t separate into concrete and water. I once had a small residential builder try to mix PCE 50% and air entrainer without adjusting his mix aggregate, and his concrete segregated on the way to the forms. The fix was simple: he added 5% more fine aggregate (sand) to the mix to give the paste more structure, and the segregation stopped. That’s not a failure of the additive combination; that’s a mix adjustment.

Let’s also talk about common use cases where this combination is not only allowed but recommended. For example, precast concrete products that need to be strong and freeze-thaw resistant: adding PCE 50% cuts curing time (because less water means fewer pores, so concrete hardens faster) and air entrainers make the product last longer. SCC mixes used in high-rise buildings often use both: PCE 50% lets the concrete flow around rebar without vibration, and air entrainers prevent cracking if the building is in a climate with temperature swings. Even decorative concrete, like stamped concrete patios, benefits: the PCE makes the mix easy to work with for stamping, and air entrainers prevent scaling from de-icing salts that get tracked onto the patio.

I’ve heard a lot of people say, “If I need air content, why not just use an air-entraining superplasticizer?” And to be clear, those exist, but they’re often more expensive, and you have less control over the final air content. When you use PCE 50% and a separate air entrainer, you can adjust each dosage independently. If your mix comes out with too much air, you can lower the air entrainer a little; if it’s too low, you can tweak it. With an air-entraining superplasticizer, the air content is tied to the plasticizer dosage, so you have less flexibility. For most contractors, especially on large jobs with strict specs, that flexibility is worth the small extra effort of adding two additives.

Now, let’s address a common misconception that I run into all the time: some people think combining PCE and air entrainers will reduce the strength of concrete. That’s only true if you add too much water to compensate for workability, or if you mess up the dosage of air entrainer. If you use PCE 50% correctly to reduce water content, and air entrainers at the right dosage (usually 4-7% air, depending on the application), the compressive strength can actually be higher than a mix without air entrainers. The PCE reduces water, so the cement paste is denser, and the air bubbles are small enough that they don’t create large voids that weaken the concrete. I have test data from our lab showing that a mix with PCE 50% and 5.5% air content had a 28-day strength of 6,100 psi, while a mix without air entrainers had a 28-day strength of 5,700 psi. That’s not a strength loss—that’s a strength gain.

Of course, like any concrete additive, there are limits. If you’re using a very high range of PCE 50% (over 0.3% by cement weight), that can cause the mix to become too plastic, making it harder to retain air bubbles. Or if you use an air entrainer that’s not compatible with your specific cement (some cements have higher alkali content that can react with certain air entrainers), you might get inconsistent air content. That’s why a quick conversation with our team can save you from those issues. We test hundreds of different cement and additive combinations every year, so we can tell you right away if your mix will work, and what adjustments you need to make.

So to circle back to the original question: Yes, Polycarboxylate Superplasticizer 50% absolutely can be used in combination with air entrainers. It’s not only possible—it’s a widely used, effective combination in the concrete industry for everything from parking lots to bridges to high-rise structures. The key is to use the right order of addition, the correct dosage rates for your specific mix, and run a small trial batch to make sure everything works as expected.

If you’re a contractor, lab technician, or builder who’s been hesitant to try this combination, I encourage you to reach out. We don’t just sell PCE 50%—we provide support to every client, from a small residential project to a large commercial job. Our lab team can help you adjust your mix, run trial tests, and make sure you get the workability, strength, and durability you need. Don’t let outdated myths keep you from using two products that work better together than they do apart.

Defoamer References

  1. Aïtcin, P. C. (2018). High Performance Concrete: Properties and Uses. CRC Press.
  2. Flatt, R. J., & Schober, I. (2006). The Colloid Chemistry of Polycarboxylate Ether Superplasticizers. Cement and Concrete Research, 36(10), 1815-1826.
  3. Ramachandran, V. S., Beaudoin, J. J., & Feldman, R. F. (2002). Concrete Admixtures Handbook: Properties, Science, and Technology. William Andrew Publishing.
  4. American Society for Testing and Materials (ASTM). (2020). Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method (C231). ASTM International.
  5. Chandra, S., & Björnström, J. (2002). Influence of Superplasticizers on Rheology of Cement Paste and Concrete. Cement and Concrete Composites, 24(3-4), 301-314.

Zibo Zhuoxing Enterprises Co., Ltd.
Zibo Zhuoxing Enterprises Co., Ltd. is one of the most professional polycarboxylate superplasticizer 50% manufacturers and suppliers in China, featured by quality products and good price. Please rest assured to buy polycarboxylate superplasticizer 50% made in China here from our factory.
Address: Block B, Yunlong International, Zhangdian District, Zibo City, Shandong Province, China.
E-mail: sales@zhuoxingchem.com
WebSite: https://www.sdzhuoxingpce.com/