Hey everyone, if you’re reading this, chances are you’re part of the textile world—whether you’re a small loom operator, a big production plant, or someone who’s just staring at a pile of empty tubos para hilados (that’s thread spool tubes, for the uninitiated) and wondering why they’re such a pain to store. Let me start by being real: I’ve been supplying these spools for over 8 years, and I’ve seen it all—people stacking them like firewood that crumbles when you need one, shoving them in damp basements that turn them moldy, even leaving them out in the rain because “I’ll deal with ‘em later.” Spoiler: later never works out, and those empty spools end up being more hassle than they’re worth. That’s why today, I’m breaking down exactly how to store them when you’re not using ‘em—no fancy warehouse jargon, just straight-up stuff that actually works, based on what I’ve seen my clients (from tiny home weavers to massive textile factories) swear by. Tubos Para Hilados

First, let’s get the basics out of the way: why does proper storage even matter? These aren’t just random plastic or cardboard tubes. The vast majority of the tubos para hilados I supply are either high-impact plastic (for heavy industrial threads like denim yarn or carpet thread) or food-grade cardboard (for softer, more delicate threads like cotton or silk). Mess up storage, and you’re looking at warped plastic that won’t fit your winding machines, or cardboard that’s moldy, stained, or so warped you can’t thread a single meter through ‘em. I’ve had a client bring me a batch of spools last year that they’d stored in an unheated shed—cracks all along the plastic, and half the cardboard ones had grown tiny black spots. They had to toss 30% of their stock, which cost ‘em time and money. So yeah, storage isn’t just about keeping things organized—it’s about saving you cash and headaches.
Let’s start with the biggest variable: what your spools are made of. That changes everything. I split my clients into two groups: cardboard tubos and plastic tubos, and each needs totally different care.
Cardboard tubos are probably the trickiest, right? They’re light, cheap, and perfect for lighter threads, but they’re like sponges for moisture. If you leave them anywhere damp—like a garage floor, a corner of your workshop that leaks when it rains, even a closet where you hang wet towels—they’ll absorb water, warp, and that’s it, they’re useless. A lot of people make the mistake of just stacking ‘em flat on a pallet, but cardboard doesn’t hold weight well, either. Stack ‘em too high, and the bottom ones get squished, so you can’t put thread on ‘em later.
Here’s what works for cardboard tubos, trust me: first, clean ‘em before you store ‘em. If there’s leftover thread fluff or lint on the ends, that’ll trap moisture and mold. Just a quick wipe with a dry rag, or even a blast of air from a compressor if you have one—takes 2 minutes, saves you a ton later. Next, don’t stack ‘em flat. Stand ‘em upright, so the pressure is spread evenly. I tell all my small clients to grab cheap plastic milk crates or those stacking storage bins with slats—they’re open, so air circulates, and you can slot the spools into the holes in the bottom. No mold, no squishing. If you don’t have crates, even a sturdy cardboard box works, just drill a bunch of holes in the sides for air. And never store cardboard spools on the concrete floor—concrete wicks up moisture like crazy. Put a layer of wooden pallets or even old plywood down first, so there’s space between the ground and your spools. If you’re storing ‘em long-term (like more than a couple months), add a couple of silica gel packets in each bin—you can get ‘em cheap at any hardware store, and they soak up extra moisture. I learned that one the hard way: a client stored 500 cardboard spools in a bin without silica, and when he pulled ‘em out 6 months later, half were soggy. Now I include free silica packets with every bulk order, just ‘cause I know how much people mess up this part.
Now plastic tubos—those are way sturdier, but they’re not invincible. The big issue with plastic is temperature and UV light. A lot of people leave plastic spools out in the sun, or in a hot warehouse that hits 100°F in the summer. What happens? The plastic warps, so the core of the spool becomes oval instead of round. That means your thread winding machine won’t grab it right, and you’ll get uneven thread tension, which leads to broken threads mid-production. Not fun. Also, if you store plastic spools near chemicals—like paint, cleaning supplies, even some types of oil—they can get brittle over time, and crack when you try to use ‘em.
For plastic tubos, the rule is: keep ‘em cool, dry, and out of direct sunlight. If you’re storing them in a warehouse, don’t stack ‘em higher than 4 feet. Wait, why? Because even high-impact plastic can deform under too much weight, especially if it’s warm. I’ve seen a stack of plastic spools that were 6 feet high— the bottom 2 feet were all bulging, like they’d been sat on. So 4 feet max. If you have heavy-duty plastic spools for industrial use, you can go a little higher, but test it: grab a spool from the bottom of a stack, roll it on a flat surface. If it wiggles or rolls lopsided, you’ve stacked too high, fix it immediately. Also, for plastic spools, don’t store them near any heat sources—heaters, radiators, even windows that get direct sun all day. Keep ‘em in a shaded, cool area, and if you’re storing ‘em outside (we know some folks who need to move spools between a main facility and a storage yard), cover ‘em with a heavy tarp that lets air through—no plastic tarps that trap moisture. A mesh tarp works way better, keeps rain off and lets wind circulate.
Now, whether you have cardboard or plastic, there are some universal mistakes I see people make all the time. Let’s run through those, ‘cause avoiding ‘em will save you so much trouble.
First, don’t mix empty spools with other stuff. I’ve had clients store tubos para hilados with old boxes, tools, even leftover fabric scraps. The fabric and scraps hold moisture, and the tools can scratch or dent the spools, especially plastic ones. Keep ‘em separate—designate a specific area just for empty spools. Even a small corner in your workshop works, as long as it’s only for spools.
Second, label ‘em. This sounds silly, but trust me. When you’re storing different sizes or types of spools (like 2-inch core vs. 3-inch core, or cardboard vs. plastic), you don’t want to be digging through a pile of unmarked spools looking for the right size when you’re ready to wind thread. I tell my clients to use a Sharpie to write the size and material on the side of each crate or bin, not just the spools. Way faster.
Third, check ‘em every month. Even if you think they’re stored perfectly, things change—humidity spikes, a roof leak you didn’t notice, a heat wave in the summer. Take 5 minutes once a month to go through your stored spools. If you spot a cardboard spool with a tiny mold spot, wipe it off right away, and use it first. If a plastic spool is warped, set it aside—don’t waste time trying to use it, it’ll cause problems later. I had a client last year who skipped checking his spools for 3 months, and when he pulled out a warped plastic spool, it broke on his winding machine, got tangled, and shut down production for 2 hours. That’s 2 hours of lost money, all because he didn’t do a 5-minute check.
Now, what about if you’re storing them long-term? Like, not just a few months, but a year or more—say you had a bulk order of spools for a big project that got delayed, or you bought extra to save money. For long-term storage, you need a little extra prep. For cardboard spools, wrap each one in a sheet of acid-free tissue paper before putting it in the bin. Acid-free paper doesn’t react with the cardboard, so no discoloration or weakening. For plastic spools, you can either wrap ‘em in a soft cloth (to prevent scuffs) or store them in sealed, airtight plastic bins with a few silica gel packets. Airtight bins keep out dust and moisture, which is perfect for long-term. Just make sure the bins are food-safe if you’re using them for cardboard spools, so no weird chemicals leach into the material.
Wait, one more thing—recycling? A lot of people ask me if they can just throw away empty spools when they’re done, but if you’re storing them to reuse, that’s where most people save money. I have a client who’s a small hand weaver—she saves 30% of her thread costs every year by reusing empty tubos para hilados. But only if she stores them right. If she’d left them in her garage, they’d be useless, but since she keeps them in stacked plastic crates in a cool closet, they’re good for 5+ uses. So reusing is totally possible, as long as storage is on point.
Now, let’s talk about what not to do, ‘cause I’ve seen way too many bad calls. Don’t store spools in attics—attics get way too hot in summer and way too cold in winter, which makes both cardboard and plastic warp. Don’t store them in basements either—basements are super humid, even if you think they’re dry. I’ve had clients move spools from a damp basement to a dry workshop, and the cardboard ones were already so soft they fell apart when you picked ‘em up. Don’t use flimsy plastic bags to store spools—they trap moisture, so even if you think you’re protecting them, you’re making mold way worse. And for the love of all things thread, don’t leave them sitting on the floor, period. I can’t tell you how many times I’ve seen a client grab a spool from the floor, and it had a crack from being stepped on, or a stain from a spill.
Look, I get it—running a textile business is busy. You’re dealing with orders, machines, employees, all the time. Storing empty spools feels like a tiny, trivial task, but it adds up. Mess it up, and you’re throwing away perfectly good spools, wasting time replacing them, and having production delays that eat into your profits. The stuff I’ve laid out here is what I’ve tested with my own clients over 8 years—no hacks, no fancy tricks, just common sense that works.

If you’re tired of dealing with warped spools, moldy cardboard, and wasted time digging through piles of empty tubos para hilados, we’ve got you covered. We supply high-quality spools in all sizes, from small 2-inch cardboard ones for home weavers to heavy-duty plastic ones for industrial factories. Whether you need a small batch or a full truckload, we can help you get the right spools, and we’re always happy to answer questions about storage, use, or anything else. Shoot us a message if you want to chat about your specific needs—we’re here to help.
Fabrics References
- Textile Storage & Handling Association. (2022). Best Practices for Thread Spool Storage & Preservation.
- International Fiber Journal. (2021). Material-Specific Storage Solutions for Textile Components.
- Small Business Textile Association. (2023). Cost-Saving Tips for Spool Management in Home & Industrial Operations.
- Plastics Industry Association. (2020). Warp Prevention Methods for High-Density Polyethylene Spools in Temperature-Controlled Environments.
- Paperboard Packaging Council. (2022). Moisture Control Strategies for Cardboard Spool Storage.
Jiaxing Shengfa Trading Co., Ltd.
Address: Second Floor, No.20, Block 5, Jiaxing-Southern China Textile City, Wangjiangjing Town, Xiuzhou District, Jiaxing City, Zhejiang Province, China Zhejiang Province, China.
E-mail: 1342945331@qq.com
WebSite: https://www.en.jstshengfas.com/