Hey everyone, if you’ve ever looked into fabrics for outdoor gear, bags, or even casual outerwear, you’ve probably run into Oxford cloth. It’s like that reliable friend that’s not too flashy but gets the job done, right? As someone who’s been supplying Oxford cloth for over 8 years—yeah, I’ve got the calluses on my hands and the late-night order confirmations to prove it—one question I get non-stop is: “What’s the air permeability of Oxford cloth anyway?” It’s such a key number, especially if you’re picking fabric for stuff people actually wear or use outside. I figured I’d break this down like I’d chat with a regular at the fabric trade show, no fancy jargon, just real talk from someone who’s got stacks of this stuff in our warehouse and tests it every single week. Oxford Cloth

First off, let’s make sure we’re on the same page about what Oxford cloth even is, because there’s way more to it than just “that woven fabric.” Most Oxford is a plain-woven fabric, usually made from cotton, polyester, or a mix of both. The weave is super specific—instead of a tight, even grid like some poplins, it’s got that subtle “basket” or slight uneven weave, right? That’s a big reason air permeability varies so much, way more than, say, a plain cotton sheet. I always tell customers: if you want to nail air permeability, you’ve got to start with three things: the fiber content, the thread count, and how it’s treated after it’s woven. No two Oxfords are created equal, so there’s no one single number I can blurt out here—sorry, I know you might want a quick answer, but that’s the honest truth.
Let’s start with the basics: what air permeability even means. Basically, it’s how much air can pass through the fabric in a set amount of time and space, right? Think of it like this: if your jacket’s made of fabric that doesn’t let air through, when you’re hiking, you’ll be sweating so much you’ll be soaked through in 20 minutes. If it lets too much air through, you’ll freeze when the wind picks up. It’s that balance, and that’s exactly why my team tests every batch we get (or make, for our custom stuff) using the standard method—we use the Textile Institute’s air permeability test, the one that measures cubic centimeters of air per square centimeter per second (cc/cm²/s) at a pressure of 100 Pa. That’s the industry standard, so everyone’s numbers are roughly comparable if they’re using the same test.
Now, let’s get to the real numbers, because that’s what everyone cares about. Let’s break it down by type of Oxford, since that’s where the differences hit. First up: cotton Oxford, the classic stuff. Most people know this for button-down shirts, right? A standard mid-weight cotton Oxford (like the 120-140 gsm one we sell a ton of) usually has an air permeability of around 30 to 60 cc/cm²/s. Wait, let me put that in plain English for you. If you hold that fabric up to your mouth and blow, you’ll feel a noticeable amount of air get through, but it’s not like a cheesecloth—you can’t blow right through it in one big gust. That’s why it’s great for dress shirts; it breathes enough so you don’t feel stuffy at a wedding, but not so much that it’s see-through.
Then there’s polyester Oxford, which is super popular for outdoor stuff, backpacks, and rainwear liners. Polyester is way smoother and more consistent than cotton, so the air permeability is tighter. A standard 150 gsm polyester Oxford that’s not coated usually clocks in around 15 to 35 cc/cm²/s. Wait, some of the heavier polyester Oxford we do for tote bags? That drops to like 8 to 12 cc/cm²/s. Why? Because the thread count’s higher—more threads per square inch, less gaps for air to squeeze through. I’ve had a backpack brand come to me wanting a polyester Oxford that’s still breathable enough for their commuter packs, so we adjust the thread count to hit that sweet spot of 20 to 25 cc/cm²/s. Perfect for when you’re walking to work in 80-degree weather—no sweaty back, but not so airy that the stuff in your backpack gets rained on if you get caught in a drizzle.
And don’t even get me started on blends—poly-cotton Oxford is our bestseller, actually, because it’s the middle ground. Blend ratios usually range from 65/35 poly/cotton up to 50/50, and their air permeability lands right in the middle of the two. A 130 gsm 65/35 poly-cotton Oxford we sell most weeks is around 22 to 40 cc/cm²/s. It’s got the softness of cotton and the durability of polyester, so it works for everything from kid’s backpacks to lightweight windbreakers. That ratio is our bread and butter, so if you’re ordering in bulk, this is the stuff you’re probably getting—no surprises on air permeability, we’ve tested hundreds of batches, so we know it inside out.
Now, here’s the thing most people don’t tell you: the post-weave treatments change this number more than anything else. Let’s say you want to make Oxford cloth water-resistant. You can do a DWR (durable water repellent) coating, or a PU (polyurethane) lamination, or even a PVC coating. Those treatments kill air permeability, full stop. For example, if you take that mid-weight cotton Oxford we talked about earlier (30-60 cc/cm²/s) and add a light DWR coating, it drops to 10 to 20 cc/cm²/s. Add a thin PU lamination? You’re looking at 2 to 5 cc/cm²/s. Want it fully waterproof? Thick PVC lamination will get it down to less than 1 cc/cm²/s. That’s why when a customer comes to us saying “I need Oxford that’s waterproof but still breathable,” we tease out exactly what they need—because treating it to be totally waterproof will make it so air can’t get through, so their jacket or backpack will be like a plastic bag after 10 minutes of moving. I had a customer last year who ordered a batch of 160 gsm poly-cotton Oxford thinking he could get it fully waterproof and breathable, but that’s a myth, right? We had to adjust it to a lighter PU lamination with a micro-pore, so it’s around 7 cc/cm²/s—still way more breathable than PVC, and water-resistant enough for light rain. He came back a month later saying his backpacks sold out in a week, so that’s the kind of stuff that matters.
Wait, also, thread count and weight play into this, right? GSM (grams per square meter) is a big number—heavier Oxford isn’t always less breathable, but usually, it is, because you’re packing more material into the same space. Let’s confirm that: a light 80 gsm cotton Oxford will have around 50 to 70 cc/cm²/s, like, you can barely hold it up without air going through. That’s great for summer shirts, but way too flimsy for anything else. A heavy 200 gsm cotton Oxford (the kind you might see for workwear jackets) is only 15 to 25 cc/cm²/s, super tough, but way less air flow. Thread count is similar: 60×60 thread count Oxford is lighter, more breathable, while 120×80 is tighter, less air. Makes sense, more threads = fewer gaps.
Now, let’s get real about what this means for you, the customer. If you’re making something that needs to breathe—like hiking boots liners, summer shirts, kids’ play jackets—you want that air permeability on the higher end: 25 to 60 cc/cm²/s. If you’re making something that needs some breathability but also wind or water resistance—backpacks, commuter jackets, tote bags—aim for 5 to 25 cc/cm²/s. And if you just want a windbreaker that blocks most wind? 1 to 5 cc/cm²/s works, but note that it will be less breathable. That’s why I always tell customers to be specific about what their end product is—can’t just say “I need Oxford with good air permeability” without saying what it’s for. That’s how we get the right batch.
I should also mention that there’s no magic number that works for everyone. I’ve had a military gear client who needed Oxford for tent panels that’s 8 to 10 cc/cm²/s—enough to keep condensation down, but not so much that rain gets in. A yoga mat cover customer came to us wanting 40 to 50 cc/cm²/s, so their mat doesn’t get sweaty and slippery when they unroll it after class. Two totally different needs, two totally different air permeability numbers, same Oxford material with just a thread count tweak.
And let’s talk about how we test this, because it’s not just guessing. Our in-house testing lab runs every batch of Oxford we ship, and we do at least 5 tests per batch to make sure the number is consistent. Sometimes a batch can have a slight variance, like if the thread tension was a little off when weaving, so we adjust that for the next run. We also keep records of every single batch we’ve shipped over the last 5 years, so if a customer calls and says “I ordered 1000 yards last year, can you get the same air permeability?” we can pull up the exact test numbers and match it up. No surprises, no shortcuts—this is why our repeat customers keep coming back.
Wait, let’s bust a common myth here: people think all Oxford is the same. Nope. I once had a customer from a big outdoor brand come to me with a sample of Oxford they’d bought from another supplier, saying the air permeability was all over the place—one roll was 40, the next was 15. That’s because the supplier was cutting corners on thread count or using cheaper, uneven threads. We tested a sample of that same Oxford, and it was all over the map, because they weren’t doing any consistent testing. That’s why testing is non-negotiable for us—we don’t want our customers to have that problem.
Now, if you’re reading this and you’re someone who’s looking for Oxford cloth for a project—whether it’s a small batch of custom bags for your shop, or a big order for a brand, or even a DIY project at home—what do you need to remember? First, figure out your air permeability sweet spot, based on what you’re making. Second, don’t be afraid to ask for the test results. Any good supplier (that’s us, obviously) will have those numbers on hand for every batch. Third, remember that treatments change this number, so if you need water or wind resistance, that will lower the air permeability.
And for my fellow suppliers out there—stop making up random numbers for air permeability. That’s not helpful, and it’s how you lose customers. Be honest, test your stuff, be specific. We’ve been doing that for years, and it’s why we’ve got clients who’ve been with us since we started.
If you’re in the market for Oxford cloth and you’re sick of guessing about air permeability, or you need help figuring out exactly what number you need for your end product, hit us up. We can send you free swatches (tested, with their air permeability numbers right on the tag) so you can test them yourself, or we can work with you to customize a batch to hit exactly what you need. No fluff, no hidden fees, just straight talk about fabric and breathability.

When it comes to Oxford cloth’s air permeability, it’s all about the details—fiber, thread count, treatments, consistent testing. You don’t need a PhD in textiles to get it right, you just need a supplier who knows their stuff and will be honest with you. That’s what we do.
Poncho Fabric References
- The Textile Institute. (2015). Standard Test Method for Air Permeability of Textile Fabrics (Method 19).
- Holme, I. (2016). Textile Fabric Performance: Functionality and End-Use Applications. Woodhead Publishing.
- ASTM International. (2019). Standard Test Method for Air Permeability of Textile Fabrics (ASTM D737-19).
- Zhang, L. et al. (2020). Breathable Textile Materials for Outdoor Apparel: A Review. Journal of Industrial Textiles, 49(8), 987-1012.
Wujiang Jiashunxin Spray Weaving Co., Ltd.
As one of the most professional oxford cloth manufacturers and suppliers in China, we’re featured by quality products and good service. We warmly welcome you to wholesale bulk customized oxford cloth from our factory. If you have any enquiry about free sample, please feel free to email us.
Address: Xingli New Village, Lili Town, Wujiang District, Suzhou City, Jiangsu Province
E-mail: xuzhiqiang20260525@163.com
WebSite: https://www.shunbangfabric.com/